HP SAN Virtualization Services Platform - Manual (Page 19)

Create snmp
command
Creates an SNMP receiver.
Syntax
create snmp receiver [name]
Keyword values
[name]
Name of the SNMP trap receiver.
See also
“ Delete snmp command ” on page 21
“ Disable snmp command ” on page 25
“ Enable snmp command ” on page 30
“ Modify snmp command ” on page 40
“ Show snmp command ” on page 62
Create user
command
Creates a new user in the specified group, or views user settings. The groups defined for the DPM
are Administrator and Monitor. When new users are added, they get the same permissions as the
existing admin or kmonitor users, depending on the group specified in the command. When you issue
this command, you must enter a password for the newly created user that is at least eight characters
in length.
Syntax
create user [user name] group [group name]
Keyword values
[user name]
Name of the new user
[group name]
Name of the group to which the user will belong: Administrator or Monitor.
Notes
Only users belonging to the Administrator group can add, delete, and disable/enable users, and the
current user cannot be disabled or deleted.
See also
“ Delete user command ” on page 22
HP StorageWorks SAN Virtualization Services Platform Data Path Module User Guide 19