HP Integrity BL870c i2 Server-Blade - Manual (Page 70)

Command line 70
Item Description
Password
(required)
The password of the new user. The password of the new user can be entered as
clear text in the command or as a masked string at the prompt.
FullName
(optional)
The full name of the user
ContactInfo
(optional)
Contact information for the user
Enabled (optional) Enables or disables the user. Valid values include "true" and "false". If not
specified, then the new user is enabled by default.
Privileges
(optional)
The allowed privileges for the user. The privileges may be any combination of
"domain", "server", "network", or "storage" separated by commas. If no
privilege is specified, then the user has no privileges and can display domain
information only. If "*" is specified, then all privileges apply.
Examples
->add user steve Password=fgY87hHl
Adds a new user by specifying the minimal amount of properties
->add user bill Password=HGtwf7272562
Privileges="domain,network" FullName="Bill Johnson"
[email protected] Enabled=true
Adds a new user and configures additional user properties
->add user Admin Password=hjkhfd Privileges=*
Adds an "Admin" user with all privileges
Item Description
remove user Remove a user from the Virtual Connect Manager database.
Syntax remove user
Parameter
UserName
(required)
The name of an existing user that will be removed. If "*" is specified, then all
users except for the default Administrator account are removed.
Examples
->remove user steve
Removes a specific user by name
->remove user *
Removes all users
Item Description
set user Modify attributes of an existing user.
Syntax set user [] [FullName=]
[ContactInfo=] [Enabled=]
[Privileges=]
Parameter
UserName
(required)
The name of the user to be modified
Properties
Password
(optional)
The new password of the user can be entered as clear text in the command or
as a masked string at the prompt. If the Password value is blank, the user is
prompted to enter the password at the prompt.