beautypg.com

HP Integrity BL870c i2 Server-Blade User Manual

Page 39

background image

Command line 39

Item

Description

modified

Properties

Destination

(optional)

The IpAddress or the DNS of the remote log destination that has been

configured

Severity (optional)

Severity of the log messages that should be sent to the specified destination.

Valid values include "Critical", "Error", "Warning", and "Info". The default
value is "Info".

Transport (optional) The transport protocol to be used for sending the log messages to the

destination. Valid values include "TCP" and "UDP". The default value is
"UDP".

Port (optional)

The port to be used on the destination to send the log messages. Valid values

include: 1 to 65536. The default value is 514.

Security (optional)

Secure transmission of the log messages. Valid values include "None" and

"STunnel". The Default value is "None", and no encryption is used during
transmission.
The "STunnel" option can be used only if the transport protocol used is TCP.

Format (optional)

The timestamp format for the log messages. Valid values include "RFC3164"

(Nov 26 13:15:55) and "ISO8601" (1997-07-16T19:20:30+01:00). The
default value is "RFC3164".

State (optional)

Enables or disables the remote log destination. Valid values include

"Enabled" and "Disabled". The default value is "Disabled".

Examples

->set log-target 1 Severity=Error Transport=TCP

Security=STunnel
Modifies log-target index number 1

->set log-target 1 Destination=192.168.3.1
Modifies log-target at index 3 and modifies the IP address to a new one

Item

Description

show lot-target

Display the remote log destination settings.

Syntax

show log-target []

Property

ID (optional)

The index of the remote log destination whose detailed configuration needs to

be viewed. '*' displays detailed information of all the remote log
destinations.

Example

->show log-target
Displays all log destination settings

Item

Description

test log-target

Send a test message to all enabled remote log destinations.

Syntax

test log-target

This manual is related to the following products: