HP Integrity BL870c i2 Server-Blade - Manual (Page 20)

Command line 20
Item Description
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure appear.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 128.
Syntax add enet-connection
[Network=]
[PXE=]
[AddressType=]
[EthernetMAC= iScsiMAC=]
[SpeedType=] [Speed=]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added.
Properties
Network (optional) The name of an existing network to associate with the connection. If
the network name is not specified, or is set to "unassigned", then the
network remains unassigned and can be assigned later.
PXE (optional) Enables or disables PXE on the network connection. Valid values are
"enabled", "disabled", and "UseBios". If this value is not specified, the
default is "UseBios".
Only one connection can have PXE enabled per profile.
AddressType (optional) The source of MAC address assignments to be used during the
creation of the new connection. If not specified, the default is the
domain default. If "User-Defined" is specified, then both an Ethernet
MAC Address and iSCSI MAC Address must also be specified. Valid
values include "Factory-Default" and "User-Defined".
EthernetMAC (required if
AddressType is User-
Defined)
The user-defined Ethernet MAC address to use for the connection. This
property is required if the AddressType specified is "User-Defined".
iScsiMAC (required if
AddressType is User-
Defined)
The user-defined iSCSI MAC address to use for the connection. This
property is required if the AddressType specified is "User-Defined".
SpeedType (optional) The requested operational speed for the server port. Valid values
include "Auto", "Preferred", and "Custom". The default value is