HP Integrity BL870c i2 Server-Blade - Manual (Page 19)

Command line 19
Item Description
UserName (Required
for enclosures that
are not imported)
A valid user name of the Onboard Administrator user for the enclosure to be
imported.
Password (Required) A valid OA user password for importing the enclosure. If no password is
given at the command line, the system interactively prompts the user for a
password during the import operation.
DoubleDense
(Optional)
If the enclosure being imported supports double-dense servers, then this
property enables the device bay display format to support a display for
double-dense servers. The default behavior is display for single-dense servers
in the enclosure.
Examples
->import enclosure UserName=Administrator
Password=fgg7h*1
Imports the local enclosure into the domain
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with a double-dense device bay display format
-> import enclosure 192.168.0.120 UserName=MyOaUser
Password=dgfsfdsjd
Imports a remote enclosure into the domain
-> import enclosure
Imports the local enclosure that is already discovered
-> import enclosure 192.168.0.120
Imports a remote enclosure that is already discovered
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure cannot be removed from the domain using the remove
enclosure command.
Syntax remove enclosure
Parameter
EnclosureID
(required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax show enclosure [|*]
Parameter