HP Integrity BL870c i2 Server-Blade - Manual (Page 51)

Command line 51
Item Description
Timeout The timeout period (in seconds) to wait for the operation to complete. The
default timeout is 60 seconds.
Examples
->poweron server 2
Powers on the specific server in bay 2 of the primary enclosure
->poweron server *
Powers on all servers in the domain
->poweron server enc0:*
Powers on all servers in a specific enclosure
->poweron server * -Timeout=120
Powers on all servers and specifies a custom timeout of 2 minutes
->poweron server enc0:1
Powers on a specific multi-blade server that occupies bays 1-4 of the primary
enclosure
Item Description
reboot server Reboot one or more physical servers.
Syntax reboot server [-Force]
[-ForceOnTimeout] [-timeout=
Parameter
ServerID
(required)
The reference ID of a server in the domain. The format of the server ID is
. If the Enclosure ID is not provided, then the
primary or local enclosure (enc0) is used by default. "*" reboots all servers in
the domain.
For a multi-blade server, the ServerID must be that of the monarch bay. This is
the ID displayed by the show server command.
Options
Force Forces a reboot operation without waiting for the OS to shut down gracefully.
This option should be used only as a last resort because it can cause potential
data loss on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (default is 60 seconds), then the server is forced to reboot.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete
(per server). The default timeout is 120 seconds.
Examples
->reboot server 2
Reboots the specific server in device bay 2 of the primary enclosure
->reboot server enc0:2 -force
Reboots a server using the force option
->reboot server * -ForceOnTimeout -timeout=180
Reboots all servers using the ForceOnTimeout option and a custom timeout
->reboot server *
Reboots all servers in the domain
->reboot server enc0:*
Reboots all servers in a specific enclosure