HP Media Center m270 Desktop PC - Manual (Page 37)

29
Star
ting PC
Manual Standby Mode
Press the Standby button on the keyboard or the
Standby button on the remote control, or briefly
press the On button on the front of the PC. The screen
goes dark, and the computer goes into standby mode.
The On button on the front of the PC has a power
indicator light that flashes when the PC is in standby.
Or
1
Click Start on the taskbar.
2
Click Turn Off Computer at the bottom of the
menu.
3
Click Stand By.
When you want to use the computer again, to make the
screen display reappear just as you left it, do one of the
following:
■ On the front of the PC, briefly press the On button.
■ On the keyboard, press the Esc key or the Standby
button.
■ On the remote control, press and hold the Standby
button for 1 or 2 seconds and then, when the screen
display appears, press the Start button.
If the computer does not work properly when you wake
it from standby, reset the PC by pressing and holding
the On button on the front of the PC for approximately
5 seconds until the computer turns off. Then turn the
computer back on.