Printing greeting cards – HP Deskjet 990cxi Printer User Manual
Page 31
31
Beyond the Basics: Printing Greeting Cards
Printing Greeting Cards
I should…
Guidelines…
1 Pull out the IN tray.
2 Slide out both of the paper guides, and
remove all paper from the IN tray.
3 Insert up to 5 cards into the IN tray as
far as they will go.
4 Slide the paper guides snugly against
the edges of the cards.
5 Push in the IN tray
6 From your software program’s File
menu, select Print.
7 Choose the print settings that match the type and
size of the cards.
Page Setup:
• Paper Size: Choose appropriate card size
• Orientation: Choose
Portrait
icon
Paper Type/Quality:
• Paper Type: Choose greeting card type
• Print Quality: Choose
Normal
Layout:
• Pages per Sheet:
1 (Normal)
• Print Both Sides: Choose if appropriate
Note: If using Automatic Two–Sided Printing,
you must use supported paper. See “Automatic
Two-Sided Printing” on page 16.
8 Print the c ards.
• Align the card edges before inserting the
cards.
• For ease of loading small cards, pull out the
IN tray and raise the OUT tray. After you
have inserted the media, lower the OUT
tray.
• If you have pre-folded greeting cards,
unfold the cards, then load the cards into
the IN tray.
• If you get an “out of paper” message, make
sure the media is positioned properly in the
IN tray. Place the media on the right side
and towards the printer. The IN tray should
be pushed in so that the paper length guide
can hold the media in place.