HP Deskjet 990cxi Printer - Manual (Page 21)

21
Printing Basics: Infrared (Ir) Printing
Printing using a HP PhotoSmart Digital
Camera
1 Locate the infrared lens on the digital camera. This is typically
found on the front of the camera.
2 Align the camera’s infrared lens with the printer’s infrared lens.
Position the camera up to 3 feet (1 meter) from the printer and
within a 30–degree total angle from the printer’s infrared lens.
• The path between the two infrared devices must be clear of
obstacles.
Note: If the digital camera is moved out of range of the printer’s
Infrared lens at any time during the printing process, the infrared
light will turn off and the printer may stop printing. If you realign
the devices within approximately 3–30 seconds, the print job will
resume.
3 Send a photo to print following the normal sending or sharing
procedures of the camera.
The infrared light on the printer displays a solid beam during the
transfer process. When finished printing, the light will turn off.