Atm3sa (atm adapter), Attributes, Atm adapter – HP NonStop G-Series User Manual
Page 78
ATM3SA (ATM Adapter)
A customer-replaceable unit (CRU) that connects the ServerNet SAN inside a server to an
Asynchronous Transfer Mode (ATM) network through a logical connection known as an ATM line.
Each ATM CRU contains one
Slot Location: ATM CRUs can be located in slots 53 and 54 in processor enclosures (service side)
or in slots 51, 52, 53, and 54 in IOMF or IOMF2 enclosures (service side).
Example: ATM3SA (12.1.53)
Attributes
ATM3SA
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Physical
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Manufacturer
Identifies the manufacturer of the component.
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Power State
Indication of whether the component is powered On or Off.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Logical
Dump Filename
The name of the file used to store dumps of the ATM CRU memory.
Physical Transmission Type
The type of transmission used by the ATM CRU. This might be either
a standard, such as SONET, or a line speed, such as 155 Mbps.
MAC Address
The media access control (MAC) address of the ATM CRU.