HP NonStop G-Series - Manual (Page 148)

Location
Configurable location identifier set in the web interface (launched by the Link
to Web Interface action) by selecting Configuration tab > System Info >
System Name.
MAC Address The media access control (MAC) address of the switch.
ROM Version The version of the startup bootcode for the switch.
Serial Number A unique identification number assigned to each switch in manufacturing.
Actions
Link to Web Interface
Opens a Web interface that provides detailed device configuration and information for the
maintenance switch.
Rediscover
Causes OSM to refresh and reanalyze the object. Refresh refers to OSM updating the attribute values
displayed in the OSM Service Connection interface. Reanalyze refers to the running of OSM incident
analysis, which checks EMS event messages and creates alarms in OSM if certain conditions exist.
Stop Monitoring
Stops OSM from monitoring the maintenance switch.
MIOE (Ethernet Controller)
Attributes
Actions
A component of PMF and PMF2 CRUs located in Group 1 only. Provides connectivity between the
service processor and the dedicated service LAN (for OSM). Each MIOE represents a single Ethernet
port, known as a Physical Interface (
PIF ) object. Each PIF is associated with a service processor ( SP )
in Group 1.
Location in OSM Tree: System > Group > Module > PMF2 > MIOE
Slot Location: Located on PMF CRUs in slots 50 and 55 of processor enclosures in Group 1
Example: MIOE $ZZLAN.MIOE0
Attributes
MIOE
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values