HP NonStop G-Series - Manual (Page 147)

Delete
Deletes the LIF.
Start
Starts the LIF.
Stop
Rather than automatically stopping the LIF (as the Abort action does), this action first warns you if
the LIF is currently in use (and stops it only after you confirm).
Maintenance Switch
Attributes
Actions
An Ethernet switch that allows the OSM console to communicate with the Maintenance Entity (ME)
in the
ServerNet switch board .
Location in OSM Tree: System > Monitored Service LAN Devices > Maintenance Switch
Example: Maintenance Switch SRSLAN
Attributes
Maintenance Switch
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Logical
Contact
Configurable contact name set in the web interface (launched by the Link to
Web Interface action) by selecting Configuration tab > System Info > System
Contact.
Type Displays the model version of the switch.
Device Status Indicates whether the switch is up or down.
Firmware Revision The version of the firmware running on the switch.
IP Address The IP address of the switch.
Lines Connected Lists the port numbers of ports on the switch that have lines connected.
Lines Disconnected
Lists the port numbers of ports on the switch that have been disconnected
(since the OSM server has been running).