HP Surestore 320ex Optical Jukebox - Manual (Page 46)

3-12 Chapter 3
Operating the Jukebox
Ejecting a Disk From the Jukebox
Ejecting a Disk From the Jukebox
NOTE Some software packages require that you load and eject disks by following the
instructions in the software. If you use a software package to manage files in the
jukebox, check the software documentation before proceeding with these steps.
Start with READY in the display.
1. Press NEXT until EJECT * displays and then press ENTER .
2. EJECT SLOT # displays. (“#” is flashing and the number of the first storage
slot in the jukebox that contains an optical disk.)
3. If you want to select the storage slot number that shows in the display, press
EJECT or ENTER . If you want to choose a different storage slot, press NEXT or
PREV until the desired slot number displays and then press ENTER . (See the note
on the following page.)
EJECTING displays as the jukebox moves the disk to the mailslot. When the
disk is in the mailslot, the display returns to EJECT SLOT #.
4. Remove the disk from the mailslot.
You may now eject additional disks by pressing ENTER and then following steps
2 through 4 until you are finished ejecting disks. When the last disk is ejected,
EMPTY displays briefly before returning to EJECT *.
5. Press CANCEL to return to the READY state.