HP UPS Network Module - Manual (Page 76)

Specifications 76
Item Description
Configuration menu access
control Password: admin (not modifiable)
Date and time Synchronize with HP Power Protector
Settings/AUX connector 9600 bits/s, 8 bits, 1 bit stop, no parity
Default parameters
Parameter Default value Possible value
Network — —
IP address 192.168.1.2 Network IP address
Subnet mask 255.255.0.0 Network IP address
Gateway Address 0.0.0.0 Network IP address
BOOTP/DHCP Enabled Active / Deactivated
IPv6 Enabled Enabled Active / Deactivated
IPv6 Auto Config Enabled Enabled Active / Deactivated
Firmware Upload
Enabled Active / Deactivated
SMTP server smtpserver 49 characters maximum
System — —
UPS Contact Computer Room Manager 49 characters maximum
UPS Location
Computer Room 31 characters maximum
History log interval (sec.) 60 10 to 99999 sec.
Default Language English English / Japanese
Notified Application table — —
— empty NA
Access control — —
User name admin 5 characters minimum, 31 characters maximum
Password admin 5 characters minimum, 31 characters maximum
SNMP — —
Community name read public 32 alphanumeric characters maximum, no
spaces
Trap port 162 Not configurable
SNMP Version V1&V3 Disabled, V1, V3, V1&V3
Read-Only User readuser 1 character minimum, 32 characters maximum
Read-Only Security Level Authentication None, Authentication, Authentication&Privacy
Read-Only Password readuser 8 characters minimum, 24 characters maximum
Read-Write User wirteuser 1 character minimum, 32 characters maximum
Read-Write Security Level Authentication&Privacy None, Authentication, Authentication&Privacy
Read-Write Password writeuser 8 characters minimum, 24 characters maximum
Date and time — —
Date and time adjustment Accept automatic update from
HP Power Protector
Synchronize with an NTP server, Accept
automatic update from HP Power Protector,
Synchronize manually
NTP server ntpserver 49 characters maximum
Serial link — —