HP UPS Network Module User Manual
Hp ups network module user guide
HP UPS Network Module
User Guide
Abstract
This document includes installation, configuration, and operation information for the HP UPS Network Module. This document is for the person who
installs and maintains power products. HP assumes you are qualified in the servicing of high-voltage equipment and trained in recognizing hazards
in products with hazardous energy levels.
Part Number: 637918-003
June 2013
Edition: 3
Table of contents
Document Outline
- HP UPS Network Module User Guide
- Abstract
- Notice
- Contents
- Introduction
- Component identification
- Installing the HP UPS Network Module
- HP UPS Network Module web interface
- HP UPS Network Module Configuration Menu
- Systems Insight Manager integration
- Optional power monitoring using SNMP
- Configuration parameters
- Updating the firmware
- Firewall configuration
- Security considerations
- Alert messages
- SNMP trap codes
- Specifications
- Troubleshooting
- Client communication failure with HP UPS Network Module in a VMware operating system
- Client server is not restarting
- Clients cannot communicate with UPS after swapping HP UPS Network Module with another UPS
- Failure to communicate with the serial or USB ports
- Forgot login password
- UPS Network Module fails to boot after upgrading the firmware
- UPS is not powered on after a scheduled shutdown
- Support and other resources
- Regulatory compliance notices
- Acronyms and abbreviations
- Documentation feedback
- Index