HP UPS Network Module - Manual (Page 12)

Installing the HP UPS Network Module 12
Installing the HP UPS Network Module
Precautions
See the Important Safety Information guide (included in the UPS kit) before installing this product.
WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The
installation of options and routine maintenance and service of this product must be performed by
individuals who are knowledgeable about the procedures, precautions, and hazards associated
with AC power products.
Required tools
No. 2 Phillips screwdriver
Installing the UPS Network Module
NOTE: It is not necessary to power down the UPS before installing the UPS Network Module.
1. Remove the two screws securing the UPS option slot cover plate and slide the plate out.
2. Install the UPS Network Module along the alignment channels in the option slot.