HP Pavilion t338d Desktop PC - Manual (Page 125)

upgrading and servicing the pc (1) 117
3 Align the two screws on the top and two screws on the bottom of the
replacement hard drive with the screw head tracks on the top and bottom of
the hard drive bracket. Slide the hard drive until it snaps into place (K).
K
L
4 Push the release tab on the top of the hard drive bracket into the locked
position (L).
5 Replace the side panel. See page 106.
installing a second hard drive
Some PC models may have an empty bay to add a second hard drive. You must
provide the drive and four 6/32 x ¼” screws (length of ¼-inch is 0.64 cm) to
secure the drive to the chassis.
1 Remove the side panel. See page 105.
2 Remove the front panel. See page 107.
3 Gently lay the PC on its side.
4 See “removing the preinstalled hard drive” on page 114.
NOTE: You do not need to remove the preinstalled hard drive from the
bracket when installing a second hard drive.