HP Surestore DLT 80 Tape Drive - Manual (Page 40)

Product Specifications and Ordering Information
Product Specification
A-3
Environmental Specification
See page 3-5 for advice on using and storing cartridges.
Operating Limits
Non-operating Limits
Vibration and Shock Tolerance
Operating Vibration
Overstress
Operating Shock
Temperature: 10°C to 40° C (50°F to 104°F)
Humidity: 20% to 80% non-condensing
Altitude: 0 m to 9 km (0 to 30,000 ft)
Temperature:
−
40°C to 66° C (
−
40°F to 151°F)
Humidity: 10% to 95% non-condensing
Altitude: 0 m to 15 km (0 to 50,000 ft)
Vibration Type Sine Sweep
Frequency Range: 5–500–5 Hz Upward and downward
Acceleration Level: 0.25g
0.010” DA
22 to 500 Hz
5 to 22 Hz (crossover)
Application: X, Y and Z axes Sweep rate: 1 octave per minute
Vibration Type Sine Sweep
Frequency Range: 5–500–5 Hz Upward and downward
Acceleration Level: 0.50g
0.010” DA
26.1 to 500 Hz
5 to 26.1 Hz (crossover)
Application: Vertical axis (top/bottom) Sweep rate: 1 octave per minute
Pulse Shape: ½ sine pulse
Peak Acceleration: 10g
Duration: 10 ms
Application: X, Y and Z axes, once in each axis
dlt-m.book Page 3 Thursday, May 4, 2000 3:52 PM