HP Surestore DLT 80 Tape Drive - Manual (Page 39)

Product Specifications and Ordering Information
Product Specification
A-2
Product Specification
Physical Specification
Performance Specification
Power Requirements
Interface Specification
Ultra-wide SCSI-2 (16-bit wide data transfers), which can be used with
both LVD (low-voltage differential) and single-ended host bus adapters.
Height: 160 mm (6.30 in)
Width 86 mm (3.39 in)
Depth: 312 mm (12.28 in)
Net Weight: 3.6 kg (7.93 lb)
Linear Bit Density: 98,250 bpi per track (DLTtape IV)
Capacity: 80 GB at 2:1 compression (DLTtape IV)
Transfer Rates
Native:
2:1 Compression: 6.0 MB/s
10.0 MB/s
Speeds
Read/write:
Rewind:
Linear Search: 160 ips
175 ips
175 ips
Times (using the normal tape type for the drive)
Rewind:
Load to BOT:
Unload from BOT: 70s average, 140s max
48s for a prerecorded tape, slightly longer for a new one
17s
Supply voltage: 100–240 V ac, automatically detected
Power: 50W maximum
dlt-m.book Page 2 Thursday, May 4, 2000 3:52 PM