HP XP P9000 Auto LUN Software - Manual (Page 59)

Description Type Item
Indicates the number and name of the CLPR corresponding to the target volume's parity
group. The following convention is used: field CLPR
CLPR-number:CLPR-name
Indicates the program which uses this volume as a target volume. If P9500is displayed,
this is the target volume which is reserved by Remote Web Console. If Other[XX]is field Owner
displayed, this is the target volume which is reserved by RAID Manager or another
program. XX is an id which is given by this program. For example, 01 indicates RAID
Manager, and 99 indicates Tiered Storage Manager. You cannot delete such a migration
plan with the Delete.
Auto Plan window
Figure 13 Auto Plan Window
The following Auto LUN operations may be performed with the Auto Plan window:
•
“Setting up auto migration plan parameters” (page 29)
•
“Deleting auto migration plans” (page 30)
•
“Recreating auto migration plans ” (page 30)
•
“Stopping the Auto Migration function” (page 31)
The Auto Plan window contains Auto Migration Plans and Auto Plan Parameters sections and is
used to set up, configure, and manage Auto Migration. The following table describes all fields,
options, and buttons on this window.
Description Type Item
Auto Migration Plans section
The value in this field is either Enable or Disable and indicates whether
or not the Auto Migration function is enabled. field Auto Migration
Indicates the status of the auto migration plans. This field can have
the following values: field Migration Status
• Not planned yet: the auto migration plans have yet to be created.
•
Not performed yet: the auto migration plans have been created
but have yet to be executed.
Auto Plan window 59