HP XP P9000 Auto LUN Software - Manual (Page 12)

Table 2 Candidates for source and target volumes by program product (continued)
Target Volume Candidate? Source Volume Candidate? Volume Type/Status Program Product
No Yes, if volumes are in SMPL
status Deleted pair volumes from
MCU
No Yes, if volume is in SMPL
status Deleted S-VOL from MCU
No Yes, if volume is in SMPL
status Deleted P-VOL from RCU
No Yes A volume in suspended,
simplex, or duplex status Continuous Access
Synchronous Z
No Yes, if volume is in suspended
status An external M-VOL
No Yes, if volume is in simplex
status An external R-VOL
No Yes. Note that the target
volume must be in the same
CLPR. A data volume pair Continuous Access Journal
and Continuous Access
Journal Z
No No A journal volume
No Yes. Note that the target
volume must be in the same
CLPR. A primary volume in any
status Continuous Access Journal
No Yes. Note that the target
volume must be in the same
CLPR. A secondary volume in PSUS
status
No No A volume in COPY or PAIR
status
No Yes. Note that the target
volume must be in the same
CLPR. A primary volume in any
status Continuous Access Journal
Z
No Yes. Note that the target
volume must be in the same
CLPR. A secondary volume in
suspend status
No No A volume in Pending Duplex
or Duplex status
No No A normal volume Compatible XRC
No Yes S-VOL Compatible FlashCopy and
Compatible FlashCopy SE
No No T-VOL
No No Virtual volume Snapshot
No No Pool volume
No Yes, if in PAIR status P-VOL
No No S-VOL
No Yes A reserved BC volume
No Yes BC pair volumes Business Copy and
Business Copy Z
No Yes A P-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:1 or 1:2
12 Requirements