Snmp traps – HP Integrity BL860c i2 Server-Blade User Manual
Page 41
Domain management 41
•
For Flex-10 connections, threshold and link state change traps reflect the state of the entire physical
port. These traps are not generated for individual FlexNICs. For more information on Flex-10
connections, see "Flex-10 overview (on page
)."
The following table provides a list of MIBs and where they are supported.
MIB
VC-Enet
VC-FC
RFC 2863 IF-MIB
X
—
RFC 4188 Bridge-MIB
X
—
RFC 3418 SNMP v2 MIB
X
X
Compaq System Info MIB
X
X
Compaq Host MIB
X
X
Compaq Rack MIB
—
X*
Network Mgmt
X
—
IP-MIB
X
—
Fibre Alliance MIB (FC Mgmt Integ)
—
X
Fabric Element MIB
—
X
VC Module MIB (VCM-MIB)
X
—
VC Domain MIB (VCD-MIB)
X
—
* Not supported by the HP 8Gb 24-Port FC module
The VC Module MIB is a VC-specific MIB that describes the state of a specific VC module. In addition to
unique VC module attributes, it defines traps for reporting alerts on port statistics, such as throughput,
errors, and discards. The VC Domain MIB combines domain-wide attributes with traps for state changes in
VC managed objects.
The latest version of the VC-specific MIBs, 8.30b or higher, can be downloaded from the HP Systems
Insight Manager "MIB Kit" site on the HP website
SNMP traps
The following table provides a summary of the available SNMP traps.
Trap
Category
Severity
MIB
cpqHoSWRunningStatusChangeTrap
VCM Legacy
Corresponds to the
new value of
cpqHoSWRunningSt
atus
CPQHOST-MIB
connUnitStatusChange
VC-FC Other
INFO
FA-MIB
connUnitDeletedTrap
VC-FC Other
INFO
FA-MIB
connUnitEventTrap
VC-FC Other
INFO
FA-MIB
connUnitSensorStatusChange
VC-FC Other
CRITICAL
FA-MIB
connUnitPortStatusChange
VC-FC Port Status
See table below
FA-MIB
authenticationFailure*
VC-FC Other
CRITICAL
SNMPv2-MIB
coldStart
VC-FC Other
CRITICAL
SNMPv2-MIB
cpqHoSWRunningStatusChange
VC-FC Other
INFO
CPQHOST-MIB