Domain settings (domain enclosures) screen – HP Integrity BL860c i2 Server-Blade User Manual
Page 26
Domain management 26
Task
Action
Clear unsaved changes on the screen
Click Clear.
Save changes and remain on this
screen
Click Apply.
Cancel without saving changes
Click Cancel.
Domain Settings (Domain Enclosures) screen
Use this screen to import, delete, or add enclosures in the domain.
Multiple enclosures are supported only if a VC-Enet module is running in bay 1 and bay 2 of the primary
enclosure.
For additional information on adding and importing a remote enclosure and connecting multiple
enclosures, see the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide.
The following table describes the columns within the Domain Settings (Enclosures) screen.
Column
Description
Enclosure ID
Assigned ID of the enclosure
Enclosure name
Name of the enclosure
Enclosure serial
number
Serial number of the enclosure
Rack name
Name of the rack (assigned through the Onboard Administrator)
OA IP Address
Local Enclosure indicates this enclosure is managed by the local OA