Deleting a domain – HP Integrity BL860c i2 Server-Blade User Manual
Page 24
Domain management 24
For additional information, see "Interconnect Bay summary screen (Ethernet module) (on page
)" and
"Administrative module removal (on page
)."
The following table describes the available actions in the Domain Settings (Domain Configuration) screen.
Clicking another link in the pull-down menu or left navigation window causes current edits that have not
been applied to be lost.
Task
Action
Change the domain name
Enter the revised domain name, and then click Apply.
Display single-dense server bays
Click the checkbox next to the appropriate selection. Available if
double-dense compatibility is selected during import.
Delete a domain
Verify that the correct domain name is displayed, and then click
Delete Domain. See "Deleting a domain (on page
)."
Save changes and remain on this
screen
Click Apply.
Clear the enclosure checkboxes
Click Cancel.
Deleting a domain
CAUTION:
Deleting a domain returns all settings to factory default. This action cannot be
undone.
1.
Power off all servers that are associated with profiles. See "Server Bay Status screen (on page
)."
2.
Navigate to the Domain Settings (Domain Configuration) screen (on page
3.
Click Delete Domain. A domain name verification window is displayed.