HP Integrity BL860c i2 Server-Blade - Manual (Page 110)

Server management 110
Task Action
Show all profiles, only assigned
profiles, or only unassigned
profiles
Click the down arrow in the Show: box.
Define a new profile Left-click in the table, right-click to display a menu, and then click Add, or
select Server Profile from the Define menu at the top of the screen.
Edit a server profile Left-click on the profile row, right-click to display a menu, and then click
Edit.
Delete a single server profile Left-click on the profile row, right-click to display a menu, and then click
Delete.
Copy a single server profile Left-click on the profile row, right-click to display a menu, and then click
Copy.
Edit a Server Profile (single profile) screen
Use this screen to edit the properties of an existing server profile. This screen enables you to do the
following:
• Change the profile name
• Add, delete, or change network connections
• Change the network port speed settings
• Enable or disable PXE
• Modify Fibre Channel connection settings (if there are one or more VC Fibre Channel modules in the
Virtual Connect domain)
• Assign, unassign, or re-assign the profile to a device bay
• Copy the profile
• Delete the profile
Click on a profile name in the left navigation window to display the Edit Server Profile screen.
If VC-assigned MAC addresses, WWNs, or non-default Fibre Channel boot parameters are being used,
the server blade must be powered off before any server side changes can be made. To power off a server
blade, see "Server Bay Status screen (on page
150 )." Changes to Ethernet network and Fibre Channel
fabric settings can be made without powering down the server. For complete information on server power
requirements when assigning or removing server profiles, see "Server profile troubleshooting (on page
113 )."
The screen can be edited only by users with server privileges, but it is viewable by all authorized users.
The following table describes the fields within the Edit Server Profile screen.
Column name Description
Profile
Profile Name Descriptive name for the server profile. Do not use spaces.
Status Status of the server profile