On the backup host – HP 3PAR Application Software Suite for Oracle User Manual
Page 98
4.48
Recovery Manager Configuration Files
Recovery Manager 3.0.3/3.0.4 for Oracle User’s Guide
4.9.2.2 Creating a Recovery Manager Configuration File using the GUI
on the Backup Host
To use the Recovery Manager GUI to create a Recovery Manager configuration file with
Remote Copy support, perform the following:
1
Start the Recovery Manager GUI on the backup host.
a
Ensure the X11 server is running on the destination host where the GUI is displayed. If
the X11 server is not running, enter the following command:
b
Ensure the
DISPLAY
environment variable is set.
c
Start the Recovery Manager GUI.
NOTE: If the database volumes do not belong to any domain, then the read-only
virtual copy's retention time cannot exceed the value of the system's
VVRetentionTimeMax
. The default value for the system's VVRetentionTimeMax is
14 days. If the database volumes belong to a domain, then the read-only virtual
copy's retention time cannot exceed the value of the domain's
VVRetentionTimeMax
if set. The retention time cannot be removed or reduced
once it is set. The retention time can be extended by vcdba_set command.
VVRetentionTimeMax
can be checked via CLI commands showsys -param and
showdomain -d
.