HP 3PAR Application Software Suite for Oracle User Manual
Page 145

6.31
Recovery Manager 3.0.3/3.0.4 for Oracle User’s Guide
-t
The timestamp of a virtual copy. It is also the name of the virtual copy. The virtual copy
name can be obtained using the
vcdba_display
command.
-m
The destination location where the virtual copy is mounted. The current user must have
permission to write to this location. By default, the virtual copy will be mounted at
/etc/
3par/solutions/
. If ASM is used on
the backup host, this option will be ignored.
-r
Re-mounts a virtual copy that has previously been mounted, but has been un-mounted due
to system reboot. This option is also helpful where a virtual copy has previously been
partially mounted, but the virtual copy devices must be scanned manually if the host HBA is
Egenera.
-v
Runs the command in verbose mode to display useful messages.