HP Insight Diagnostics Software - Manual (Page 29)

Figure 17 Error Log
Integrated Management Log tab
The Integrated Management Log (IML) tab contains system errors discovered during POST and by
the System Management driver during normal operations. IML entries are dated and have severity
levels and error counts that can be used to help isolate a problem. The Integrated Management
Log on the Log tab displays the current entries in the IML.
Each IML entry displays the following information about a failed device
•
One of the following severity levels:
Informational indiciates general information about a system event ◦
◦ Repaired indicates this entry has been repaired
◦ Caution indicates a non-fatal error condition has occurred
◦ Critical/Failed indicates a device failure
•
Class—The type of the class.
•
Last Update—The date and time that the event was last added to the IML.
•
Initial Update—The date and time that the event was initially added to the IML.
•
Count—The count of the event.
•
Description—The description of the event.
From this tab, the following actions are available:
•
To change the severity level to Repaired, click Set Selected Items to Repaired.
•
To select all IML entries, click Check All.
•
To deselect any selected IML entries, click Uncheck All.
The Log tab 29