HP Insight Diagnostics Software - Manual (Page 20)

To start a diagnostic test:
1.
Click Diagnose tab.
2. Select the device to diagnose:
•
Select All Devices to assess the health of all logical volumes and power supplies.
•
Select one or more specific logical volumes or power supplies to assess the health of the
selected devices.
3. Click Diagnose button.
Figure 9 Diagnose tab
If the computer does not have any logical volumes or power supplies that are diagnosable, the
following message appears:
System does not have any diagnosable devices installed.
Using the Test tab (HP Insight Diagnostics Offline Edition only)
IMPORTANT: This feature is available only in HP Insight Diagnostics Offline Edition.
The offline HP Insight Diagnostics Test feature provides options for diagnostic testing of all major
hardware components in the system. Three tests are available on the Test tab:
•
Quick Test runs a predetermined test script for which a sample of each hardware component
is exercised and requires no user intervention.
•
Complete Test runs a predetermined script for which each hardware component is tested fully.
•
Custom Test runs only the tests selected. This test is the most flexible option, with selections for
specifying devices, tests, and test parameters.
Running a Quick Test
1. Click Quick Test.
20 Using HP Insight Diagnostics