HP Intelligent Infrastructure Analyzer Software - Manual (Page 56)

B Host HBA error codes
Table 19 Host HBA error codes
Description Host HBA error code
Adapter is functional or online. Usually the initial status. ADAPTER_ONLINE
The Adapter Link or Loop is down. ERROR_FLAG_LOOP_DOWN
Driver detected error at the system level. ERROR_FLAG_SYSTEM_ERROR
Adapter configuration change is detected. ERROR_FLAG_LIP_OCCURRED
Adapter Loop is up. ERROR_FLAG_LOOP_UP
Adapter or SAN configuration needs to be re-scanned. ERROR_FLAG_PORT_UPDATE
Adapter SFP config has changed. ERROR_FLAG_SFP_UPDATE
Adapter Loop is up. LOOP_CURRENTLY_UP
Adapter is bad ADAPTER_DISABLED
This is used in some special OEM environments where
preboot
commands are sent to the adapter.
ALT_WWN_ACTIVE
Adapter Loop is down. Constant notifications are sent. SENT_LOOP_DOWN_UPDATE
56 Host HBA error codes