HP XP RAID Manager Software - Manual (Page 136)

Probable causes and recommended action Export Tool messages
An error occurs at the RMI server. For detailed information, see the HP
P9000 Remote Web Console Messages. RMI server error (part-code, error-number)
The Export Tool cannot display the online help due to a system error. Unable to display help message
The Export Tool cannot obtain the serial number due to a system error. Unable to get serial number
SVP does not contain monitoring data. Unable to get time range for monitoring
The Export Tool cannot read the command file. Specify the name of the
command file correctly. Unable to read command file: file
The specified subcommand is unavailable. Unable to use the command: command
The specified operand of the group subcommand is unavailable. Unable to use the group name: operand
The Export Tool cannot resolve the host name. Specify the correct host name. Unknown host: host
The Export Tool does not support the specified command. Specify a correct
command. Unsupported command: command
The specified operand is not supported. Correct the specified operand. Unsupported operand: operand
The specified option is not supported. Correct the specified option. Unsupported option: option
Files exist in path. Some file exists in path. What do you do?
clear(c)/update(u)/stop(p) You selected
"action". Is it OK? (y/n)
If you want to clear the files, press the key.
If you want to overwrite the files, press the key.
If you want to stop the operation, press the
key.
When you press a key, a message appears and asks whether to perform
the specified action.
To perform the specified action, press the key.
To cancel the specified action, press the key.
The retry subcommand is written in an incorrect position in the command
file. Specify the following subcommand before
login subcommand: retry
Write the retry subcommand before the login subcommand.
The Export Tool starts collecting data specified by the group subcommand. Start gathering group data Target = xxx,
Total = yyy End gathering group data
The number of target objects is xxx and the total number is yyy (see Note
below).
The Export Tool ends collecting data.
Note: For example, suppose that the storage system contains 100 parity
groups and the command file contains the following command line: group
PG 1-1:1-2
, then the Export Tool displays the message "Target=2,
Total=100", which means that the group subcommand specifies two parity
groups and that the total number of parity groups in the storage system is
100.
A syntax error is detected in a command line in your command file. Check
the command line for the syntax error and then correct the script. Syntax error: "line"
Some operands must be enclosed by double quotation marks ("). Check
the command line to find whether double quotation marks are missing.
The export tool version does not correspond to SVP version. Upgrade the
export tool to match the export tool version with SVP version. [login]version unmatched
136 Export Tool