Syntax, Operands – HP XP RAID Manager Software User Manual
Page 102
Table 10 Operands of the group subcommand and saved monitoring data (continued)
See
Saved ZIP file
Monitoring data saved in
the file
GUI operation
Operand
1
When you specify the PhyPG, PhyLDEV, PhyProc, or PhyESW operand, you can select the storing period of the
monitoring data to be exported from short range or long range. When you specify other operands, the monitoring
data in short range is exported.
2
A ZIP file name beginning with PhyExLDEV_.
3
A ZIP file name beginning with RCLDEV_.
4
A ZIP file name beginning with URLDEV_.
You can use the group subcommand more than one time in a command file. For example, you
can write the following script:
group PortWWN CL1-A:CL1-B
group RemoteCopy
If an operand is used more than one time in a command file, the last operand takes effect. In the
example below, the first group subcommand does not take effect, but the second group
subcommand takes effect:
group PortWWN CL1-A:CL1-B
group PortWWN CL2-A:CL2-B
Syntax
group {PhyPG [Short|Long] [parity-group-id]:[parity-group-id]][…]|
PhyLDEV [Short|Long] [parity-group-id]:[parity-group-id]][…]|
PhyExG [[exg-id]:[exg-id]][…]|
PhyExLDEV [exg-id]:[exg-id]][…]|
PhyProc [Short|Long]|
PhyESW [Short|Long]|
PG [[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]][…]|
LDEV [[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]:
[parity-group-id|V-VOL-group-id|exg-id|Migration-Volume-group-id]][.…]|
internal|virtual]|
Port [[port-name]:[port-name]][...]|
PortWWN [port-name]:[port-name]][...]|
LU[[port-name.host-group-id]:[port-name.host-group-id]][…]|
PPCGWWN[[monitor-target-name:monitor-target-name]][…]|
RemoteCopy|
RCLU [[port-name.host-group-id]:[port-name.host-group-id]][…]|
RCLDEV[[LDKC-CU-id]:[LDKC-CU-id]][…]|
UniversalReplicator |
URJNL[[JNL-group-id]:[JNL-group-id]][…]|
URLU [[port-name.host-group-id]:[port-name.host-group-id]][…]|
URLDEVr[[LDKC-CU-id]:[LDKC-CU-id]][…]|
LDEVEachOfCU[[[LDKC-CU-id]:[LDKC-CU-id]][…]|internal|virtual]|
PhyMPPK
}
Operands
Description
Operand
Use this operand to export statistics about parity group usage rates, which are displayed in the
Monitor Performance window. When statistics are exported to a ZIP file, the file name will be
PhyPG [Short|Long]
[[parity-group-id]:[parity-group-id]][…]
PhyPG_dat.ZIP
. For details on the statistics exported by this operand, see
.
102 Export Tool