HP XP RAID Manager Software User Manual
Page 106
Description
Operand
When you specify variables port-name.host-group-id, you can narrow the range of LU paths
whose monitoring data are to be exported. port-name is a port name. host-group-id is the ID of
a host group (that is, a host storage domain). The host group (host storage domain) ID must be
a hexadecimal numeral. The colon (:) indicates a range. For example, CL1-C.01:CL1-C.03
indicates the range from the host group #01 of the CL1-C port to the host group #03 of the
CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon.
The smallest port-name value is CL1-A and the largest port-name value is CL4-r. The following
formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify LU CL1-C.01:CL2-A.01, but you cannot specify
LU CL2-A.01:CL1-C.01
. Also, you can specify LU CL1-C.01:CL1-C.03, but you cannot
specify LU CL1-C.03:CL1-C.01.
If port-name.host-group-id is not specified, the monitoring data of all the LU paths will be exported.
Use this operand when you want to export statistics about all host bus adapters connected to
ports, which are displayed in the Monitor Performance window. When statistics are exported
PPCGWWN[
[Monitor-target-name]
:[
M
o
n
i
t
o
r
-
t
a
r
g
e
t
-
n
a
m
e
]]
[…]
in a ZIP file, the file name will be PPCGWWN_dat.ZIP. For details on the statistics exported by
this operand, see
When you specify variables monitor-target-name, you can narrow the range of monitoring target
groups whose monitoring data are to be exported. Monitor-target-name is the name of an
monitoring target group. If the name includes any non-alphanumeric character, the name must
be enclosed by double quotation marks ("). The colon (:) indicates a range. For example,
Grp01:Grp03
indicates a range of SPM groups from Grp01 to Grp03.
Ensure that the monitor-target-name value on the left of the colon is smaller than the
monitor-target-name value on the right of the colon. Numerals are smaller than letters and
lowercase letters are smaller than uppercase letters. In the following formulae, values are
arranged so that smaller values are on the left and larger values are on the right:
•
0 < 1 < 2 < …< 9 < a < b < …< z < A < B < … < Z
•
cygnus < raid < Cancer < Pisces < RAID < RAID5
If monitor-target-name is not specified, the monitoring data of all the host bus adapters will be
exported.
Use this operand when you want to export statistics about remote copy operations which are
displayed in the Usage Monitor tab in the Cnt Ac-S and Continuous Access Synchronous Z
RemoteCopy
window. By using this operand, you can export monitoring data about remote copy operations
performed by Continuous Access Synchronous and Continuous Access Synchronous Z in the
whole volumes. When statistics are exported to a ZIP file, the file name will be
RemoteCopy_dat.ZIP
. For details on the statistics exported by this operand, see
.
Use this operand when you want to export statistics about remote copy operations displayed
in the Usage Monitor tab in the Cnt Ac-S and Continuous Access Synchronous Z window. By
RCLU[
[port-name.host-group-id]
:[
p
o
r
t
-
n
a
m
e
.
h
o
s
t
-
g
r
o
u
p
-
i
d
]]
[…]
using this operand, you can export monitoring data about remote copy operations performed
by Continuous Access Synchronous and Continuous Access Synchronous Z at each volume (LU).
When statistics are exported to a ZIP file, the file name will be RCLU_dat.ZIP. For details on
the statistics exported by this operand, see
When you specify variables port-name.host-group-id, you can narrow the range of LU
paths whose monitoring data are to be exported, where port-name is a port name
andhost-group-id is the ID of a host group. The host group ID must be a hexadecimal
numeral. The colon (:) indicates a range. For example, CL1-C.01:CL1-C.03 indicates the
range from the host group #01 of the CL1-C port to the host group #03 of the CL1-C port.
Ensure that the value on the left of the colon is smaller than the value on the right of the colon.
The smallest port-name value is CL1-A and the largest port-name value is CL4-r. The following
formula illustrates which port-name value is smaller than which port-name value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify RCLU CL1-C.01:CL2-A.01, but you cannot specify
RCLU CL2-A.01:CL1-C.01
. Also, you can specify RCLU CL1-C.01:CL1-C.03, but you
cannot specify RCLU CL1-C.03:CL1-C.01.
106 Export Tool