HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 51)

Command line 51
Item Description
->reboot server * -ForceOnTimeout -timeout=180
Reboots all servers using the ForceOnTimeout option and a custom timeout
->reboot server *
Reboots all servers in the domain
->reboot server enc0:*
Reboots all servers in a specific enclosure
Item Description
show server Display all servers in the domain.
Syntax show server [ | *]
Parameter
ServerID (optional) The reference ID of a server in the domain. The format of the server ID is
. If the EnclosureID is not provided, then the primary or
local enclosure is used by default.
Examples
->show server
Displays a summary listing of all servers
->show server *
Displays detailed information for all servers
->show server enc2:*
Displays detailed information for all servers in a specific enclosure
->show server enc0:4
Displays detailed information for the specific server in device bay 4 of an
enclosure named "MyEnclosure"
serverid
Add Virtual Serial Number and Virtual UUID properties to server profiles.
Supported actions: help, set, show
Item Description
set serverid Modifiy Virtual Server ID domain settings. The serial number attributes can be
changed only in one of the following scenarios:
• Virtual Server ID source is Factory-Default.
• Virtual Server ID source is VC-Defined or User-Defined, but no profiles are
using server IDs from this source.
• Virtual Server ID source is User-Defined, and this range is being extended by
lowering the start or increasing the end values.
Syntax set serverid Type=Factory-Default
set serverid Type=VC-Defined [PoolType=<1-64>]
set serverid Type=User-Defined Start=VCX01nnnnn
End=VCX01nnnnn
Properties