HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 32)

Command line 32
Item Description
update firmware Update the firmware on all Virtual Connect modules in the domain.
Syntax update firmware [-quiet] URL=
Parameter
quiet Suppresses progress messages and displays only SUCCESS and FAILURE messages
Option
URL (required) The location and name of the firmware image to use for the update. The default
protocol to use is HTTP.
Example
->update firmware url=http://www.myserver.com/fw/vc-1.20.rom
Updates the firmware on all Virtual Connect modules in the domain
->update firmware -quiet
URL=http://www.someserver.com/firmware/vc-1.20.rom
Updates firmware using the -quiet option
igmp
Manage Ethernet IGMP Snooping settings.
Supported actions: help, set, show
Item Description
set igmp Modify Ethernet IGMP Snooping settings.
Syntax set igmp [Enabled=] [Timeout=]
Properties
Enabled
(optional)
Enables or disables IGMP Snooping. Valid values include "true" and "false".
Timeout
(optional)
The idle timeout interval (in seconds) for IGMP Snooping. Valid values include
integers from 1-3600. The default IGMP idle timeout is 260 seconds.
Examples
->set igmp Enabled=true
Enables IGMP Snooping
->set igmp Enabled=true Timeout=30
Enables IGMP Snooping and sets the idle timeout
Item Description
show igmp Display Ethernet IGMP Snooping settings.
Syntax show igmp
Example
->show igmp
Displays IGMP Snooping settings