HP Console Management Controller - Manual (Page 87)

Troubleshooting 5-3
Compaq Confidential – Need to Know Required
Writer: A. J. Scheckelhoff Project: Compaq Console Management Controller User Guide Comments:
Part Number: 218258-002 File Name: f-ch5 Troubleshooting.doc Last Saved On: 6/20/01 8:48 PM
Troubleshooting After Startup
For problems that occur after the CMC started, these suggested actions address
possible causes.
Table 5-2
Troubleshooting Guide (After Startup)
Symptom Possible Cause Suggested Action
Audible Alarm Alarm condition exists. Check display or console for
error condition and clear.
Repairing the CMC
Repairs to the CMC must be carried out by Compaq or a Compaq authorized
service representative. The only user-serviceable parts are the fuses located in
the rear of the unit. If the fuses have opened, verify that the condition that
caused the fault has been cleared. Replace the fuse with the exact rating as
specified on the unit label. Contact your Compaq authorized service
representative for more details.
WARNING: Disconnect all power cords before servicing the unit.