HP XP Continuous Access Software - Manual (Page 48)

48 Continuous Access XP for the XP1024/XP128
The RCU Operation pane is updated when the tab is switched from one to another, Refresh is clicked,
and settings for the RCU are applied. For the RCU settings operation, see ” RCU operations ” on page 54.
Figure 22 RCU Operation pane
The RCU Operation pane contains the following items:
• Switch Display options:
• MCU&RCU: Displays the CU Number tree and MCU/RCU list (see ”
CU Number tree and
MCU/RCU list ” on page 48). The MCU/RCU list is displayed by default.
• Port: Displays the Package tree and Port list (see ” Port tree and Port list ” on page 49).
• Operation: Displays current operation performed by the RCU Operation pane.
CU Number tree and MCU/RCU list
Click MCU&RCU in the Switch Display box to display the CU Number tree and MCU/RCU list. In the CU
Number tree, only CU numbers, which include active MCUs or RCUs, are displayed. There is no branch
under the CU Number tree. When the CU contains an RCU that has a failed path, the error icon ( ) is
shown for the CU number in the CU Number tree.
In the CU Number tree, select the CU number to display the specified information in the MCU/RCU list.
You can select only one CU number on the CU Number tree.
Figure 23 RCU Operation pane with the MCU&RCU option button selected