HP ProLiant DL160 G5 Storage-Server - Manual (Page 18)

NOTE:
The direct attachment method requires a display, keyboard, and mouse.
Table 2 Network access methods
Notes HP ProLiant Rapid
Startup Wizard access Storage server
desktop
accessible? I.E. 5.5 or
later
required? Access method
Requires a monitor,
mouse, and
keyboard.
Directly from the storage
server desktop.
Yes No Direct attachment
Does not display the
storage server
desktop. Directly from the HP
ProLiant Storage Server
Management console.
No Yes Remote browser
Windows Remote
Desktop capability
required on client.
Indirectly from the
storage server desktop.
Yes No Remote Desktop
See the HP ProLiant
Lights-Out 100
Remote
Management User
Guide or HP
Integrated
Lights-Out 2 User
Guide for server
access instructions.
Indirectly from the
storage server desktop.
Yes Yes
Remote management
(Lights-Out 100 or
Integrated Lights-Out
2)
NOTE:
The ML110 G5 Storage Server does not include embedded Lights-Out 100 remote management support.
This server requires the purchase and installation of the Lights-Out 100c Remote Management Card in
order to use Lights-Out 100 remote management features. For more information about the Lights-Out 100c
Remote Management Card, see
http://h18004.www1.hp.com/products/servers/management/remotemgmt/lightsout100/index.html .
Planning a network configuration
You use the Rapid Startup Wizard to configure your storage server. This wizard is displayed
automatically when you first start your system. Before you run the Rapid Startup Wizard, it is helpful
to gather the network configuration information you need, including:
• User name and administrator password (the system provides you with defaults you need to change)
• E-mail addresses to set up system alerts
• SNMP settings
• Local area network (LAN) configuration settings
To help you gather this information, see “ Configuring the server on the network ” on page 30.
Installing and configuring the server 18