HP Integrity NonStop H-Series - Manual (Page 41)

Chapter Five - SCSI Bridge Electronics
Tandem 5142-xSE Rackmount Tape Subsystems User Guide 3 1
5.13.2 Activating a hardware self test
Enter
Set-Up 3
PRESS to
Select
Hdwr
Test
PRESS to
Run Hdwr
Test
Testing
Scsi
Hdwr
Test
Ram Test
& Reset InFourmm
========
Power On
SelfTest C1537A
Rev L610
5142
T133BID5
Figure 43 Activating a hardware self-test
This diagnostic item provides you with a more thorough method of testing memory and
peripheral hardware.
5.13.3 Making a code tape
Load
Tape
Create a
CodeTape
PRESS to
Escape
Create a
CodeTape
PRESS to
Run
Create a
CodeTape
PRESS to
Confirm
Create a
CodeTape
waiting
for tape Enter
Set-Up 3
PRESS to
Select
Figure 44 Making a code tape
The SCSI bridge electronics' firmware may be copied to another unit by making a Code
Tape. Configuration settings are not carried across in this tape. They must be entered
manually. You will be prompted to insert a scratch tape. During operation the Performance
Display appears and 64k transfers. Upon successful completion, the tape unloads and you
return to the menu system.