HP LaserJet Pro M701 Printer series - Manual (Page 51)

Configure IP network settings
● Printer sharing disclaimer
● View or change network settings
● Rename the product on a network
● Manually configure IPv4 TCP/IP parameters from the control panel
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems
and not of the HP printer drivers. Go to Microsoft at www.microsoft.com .
View or change network settings
Use the HP Embedded Web Server to view or change IP configuration settings.
1. Print a configuration page, and locate the IP address.
a. On the control panel, press the OK button.
b. Scroll to the Reports menu, and then press the OK button.
c. Scroll to the Configuration Report option, and then press the OK button to print the report.
2. Open a Web browser, and in the address line, type the IP address exactly as it displays on the product
control panel. Press the Enter key on the computer keyboard. The EWS opens.
3. Click the Networking tab to obtain network information. Change settings as needed.
Rename the product on a network
If you want to rename the product on a network so that it can be uniquely identified, use the HP Embedded
Web Server.
1. Print a configuration page, and locate the IP address.
a. On the control panel, press the OK button.
b. Scroll to the Reports menu, and then press the OK button.
c. Scroll to the Configuration Report option, and then press the OK button to print the report.
2. Open a Web browser, and in the address line, type the IP address as it displays on the product control
panel. Press the Enter key on the computer keyboard. The EWS opens.
3. Open the System tab.
ENWW Configure IP network settings 43