HP Surestore 10.100 Tape Library User Manual
Page 214
212 Library Error Codes
Appendix
21
15H
A chassis fan is
disconnected or
faulty.
Check that the chassis fan cable connection is
secure.
22
16H
Chassis interconnect
cables are
disconnected or
faulty.
Check that the chassis interconnect cables are
secure.
23
17H
Front panel cable is
disconnected or
faulty.
Check that the front panel cable connections are
secure.
24
18H
Transport bar code
reader failed self test.
Power cycle the library.
25
19H
Library levels
measured does not
match the number of
levels detected.
■
Check for obstructions in the vertical path.
■
Check that the chassis interconnect cable
connection is secure.
26
1AH
Upper level fan cable
failed.
See
Troubleshooting Common Problems
page 140 for troubleshooting procedures.
27
1BH
Transport controller
unable to
communicate with
transport.
Replace the transport assembly.
28
1CH
Transport controller
needs new firmware.
Update the library’s firmware (see
29
1DH
Failed transport
firmware download.
Update the transport’s firmware (see
50
32H
Test not run, an
invalid test number
was specified.
If incorrect test number was designated when
initiating a test over the SCSI interface, select
desired number and then re-initiate the test.
Table 46
Error Codes and Recovery Procedures
Decimal
Error
Hex
Error
Description
Recovery Method