Interpreting library leds, Interpreting library leds 130 – HP Surestore 10.100 Tape Library User Manual
Page 132
130 Interpreting Library LEDs
Chapter 4
Interpreting Library LEDs
LEDs communicate status and errors as they are occurring. Use the library
LEDs to get an indication of how the library is functioning.
All library cards and drive modules contain LEDs. In general, a yellow LED
comes on during power up and changes to green when power up is
successful. This may take a few minutes on some library cards.
The LED bar underneath the front panel display indicates library activity.
Figure 46
Library LED Bar
Note
on page 131 shows where components that contain
LEDs are located. These LEDs are described later in this chapter.
Green
Library is ready and idle.
Flashing Green
Library or drive is active.
Amber
Library is partially available and idle (
Flashing Amber
Library failed (