HP LaserJet M3027 Multifunction Printer series - Manual (Page 54)

Menu item Sub-menu item Sub-menu item Values Description
PCL Form Length Type a value
between 5 and 128
lines. The factory
default is 60 lines. PCL is a set of printer commands that
Hewlett-Packard developed to provide
access to printer features.
Orientation Portrait (default)
Landscape
Select the orientation that is most often used
print jobs. Select
Portrait if the short edge is
at the top or select Landscape if the long edge
is at the top.
Font Source Select the source
from the list. Use this feature to select the font source for
the user-soft default font.
Font Number Type the font
number. The range is
between 0 and 999.
The factory default is
0. Use this feature to specify the font number for
the user-soft default font using the source that
is specified in the
Font Source menu item.
The device assigns a number to each font
and lists it on the PCL font list (available from
the
Administration menu).
Font Pitch Type a value
between 0.44 and
99.99. The factory
default is 10.00. If Font Source and Font Number indicate a
contour font, then use this feature to select a
default pitch (for a fixed-spaced font).
Symbol Set PC-8 (default)
(50 additional symbol
sets from which to
choose)
Use this feature to select any one of several
available symbol sets from the control panel.
A symbol set is a unique grouping of all the
characters in a font.
Append CR to LF No (default)
Yes
Use this feature to configure whether a
carriage return (CR) is appended to each line
feed (LF) encountered in backwards-
compatible PCL jobs (pure text, no job
control).
Suppress Blank
Pages No (default)
Yes
This option is for users who are generating
their own PCL, which could include extra form
feeds that would cause blank pages to be
printed. When
Yes is selected, form feeds are
ignored if the page is blank.
Media Source
Mapping Standard (default)
Classic
Use this feature to select and maintain input
trays by number when you are not using the
device driver, or when the software program
has no option for tray selection.
Table 2-15 Device Behavior menu (continued)
42 Chapter 2 Control panel ENWW