HP LaserJet M3027 Multifunction Printer series - Manual (Page 232)

Physical specifications
Table C-1 Printer dimensions
Printer model Height Depth Width Weight 1
HP LaserJet M3027, M3027x, and
M3035 MFPs 550 mm (21.7 in) 510 mm (20.0 in) 525 mm (20.7 in) 27.6 kg (60.6 lb)
HP LaserJet M3035xs MFP 688 mm (27.1 in) 33.4 kg (73.5 lb)
1 With print cartridge
Table C-2 Printer dimensions with all doors and trays fully opened
Printer model Height Depth Width
HP LaserJet M3027, M3027x, and M3035 MFPs 870 mm (34.3 in) 978 mm (38.4 in) 464 mm (19.3 in)
HP LaserJet M3035xs MFP 1,010 mm (39.8 in)
Electrical specifications
WARNING! Power requirements are based on the country/region where the device is sold. Do not
convert operating voltages. This can damage the device and void the product warranty.
Table C-3 Power requirements
Specification 110-volt models 220-volt models
Power requirements 100 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current 7.5 Amps 4.0 Amps
Table C-4 Power consumption (average, in watts) 1
Printer model Printing 2 Ready 3 , 4 Sleep 5 Off
HP LaserJet M3027 560 W 6 35 W 23.6 W 0.2 W
HP LaserJet M3027x 560 W 6 35 W 23.6 W 0.2 W
HP LaserJet M3035 590 W 6 34.5 W 24 W 0.2 W
HP LaserJet M3035xs 610 W 6 34.5 W 24 W 0.2 W
1 Values subject to change. See www.hp.com/support/LJM3027mfp or www.hp.com/support/LJM3035mfp for current
information.
2 Power numbers are the highest values measured using all standard voltages.
3 Default time from Ready mode to Sleep = 30 minutes.
4 Heat dissipation for HP LaserJet M3027 models in Ready mode = 119.5 BTU/hour. Heat dissipation for HP LaserJet M3035
models in Ready mode = 117.5 BTU/hour.
5 Recovery time from Sleep to start of printing = less than 8.5 seconds.
6 Print speed is 27 or 35 ppm.
220 Appendix C Specifications ENWW