HP LaserJet M3027 Multifunction Printer series - Manual (Page 34)

Default Fax Options
NOTE: Values shown with “(default)” are the factory-default values. Some menu items have no default.
Table 2-5 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Use this feature to set the resolution for sent
documents. Higher resolution images have more dots
per inch (dpi), so they show more detail. Lower
resolution images have fewer dots per inch and show
less detail, but the file size is smaller.
Fax Header Prepend (default)
Overlay
Use this feature to select the position of the fax header
on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select
Overlay to print the fax header over the top of
the fax content without moving the fax content down.
Using this option could prevent a single-page fax from
flowing onto another page.
Table 2-6 Fax Receive menu
Menu item Values Description
Forward Fax Fax Forwarding
Change PIN
To forward received faxes to another fax device, select Fax
Forwarding and Custom . When you select this menu item for the fist
time, you are prompted to set up a PIN. You will be prompted to enter
that PIN every time you try to use this menu. This is the same PIN
that is used to access the Fax Printing menu.
Stamp Received Faxes Enabled
Disabled (default)
Use this option to add the date, time, sender’s phone number, and
page number to each page of the faxes that this device receives.
Fit to Page Enabled (default)
Disabled
Use this feature to shrink faxes that are larger than Letter-size or A4-
size so that they can fit onto a Letter-size or A4-size page. If it this
feature set to
Disabled , faxes larger than Letter or A4 will flow across
multiple pages.
Fax Paper Tray Select from the list of trays. Select the tray that holds the size and type of paper that you want to
use for incoming faxes.
22 Chapter 2 Control panel ENWW