beautypg.com

HP StorageWorks XP Remote Web Console Software User Manual

Page 31

background image

• Properties: For the parity group containing internal volumes of storage system, the capacity

of parity group and the RAID configuration are displayed. For the parity group containing

external volumes, the capacity of external volumes is displayed, but the RAID configuration is

not displayed. For the parity group containing virtual volumes, the capacity of virtual devices

(VDEVs) is displayed, but the RAID configuration is not displayed.

• Emulation: Emulation type of the parity group.

Detail For CLPR in Subsystem: Settings of CLPR that is specified in the tree are displayed. You

must change the settings.
• CLPR Name: If you change the CLPR name, you may use alphanumeric up to 16 characters.
• Cache Size: indicates the cache capacity of CLPR. The Cache Size value must be selected

or input from 6 gigabytes to 252 gigabytes in two gigabytes increment. The default value

is 4 gigabytes.

• Cache Residency Size: indicates the capacity of the Cache Residency cache. The value of

Cache Residency Size must be selected or input from 0 to 248 gigabytes in 0.5 gigabytes

increment. The default value is 0 gigabyte.

Note:

The value selected for this CLPR must be

bigger than the capacity of the Cache Residency cache that has been already defined for this

CLPR by the Cache Residency Manager program product. Please check the size of Cache

Residency that has been already defined according to the window of Cache Residency

Manager before you change the value.

• Num. of Cache Residency Areas: indicates the number of cache residency areas. The value

must be input from 0 to 16,384. The default value is 0.

Note:

The value selected for this CLPR

must be bigger than the number of Cache Residency areas that has been already defined for

this CLPR by the Cache Residency Manager program product. Please check the number of

Cache Residency areas that has been already defined according to the window of Cache

Residency Manager before you change the value.

Note:

The capacity value of CLPR0 cannot be changed directly. If the capacity of other CLPR is

changed, the difference will be reflected to the capacity of CLPR0.

Note:

The maximum available cache capacity (= the capacity of mounted cache - total amount

of usage for other CLPRs) is displayed for each upper limit of Cache Size, Cache Residency

Size, and Num. of Cache Residency Areas.

Note:

The remaining capacity which is calculated by subtracting Cache Residency Size from

Cache Size needs 4GB or more. If you have changed Cache Size or Cache Residency Size,

verify that the capacity which is calculated by subtracting Cache Residency Size from Cache

Size remains 4GB or more in CLPR0.

Note:

For details on Cache Residency, see the HP StorageWorks XP24000 Cache Residency

Manager User’s Guide.

Apply button applies settings in the Partition Definition window.

Cancel button cancels the settings that are input or selected, and restores the settings to the

initial status.

XP24000 Disk/Cache Partition User's Guide

31

This manual is related to the following products: