HP TouchSmart IQ775 Desktop PC - Manual (Page 27)

Using the HP TouchSmart PC 23
Cleaning the HP TouchSmart PC Screen
For optimal touch performance, the HP TouchSmart PC screen requires periodic cleaning to remove any
particles on the sides and surface of the screen. The touch screen has a protective glass surface that can be
cleaned by using a soft cloth or paper towel dampened with a typical household glass cleaner.
To clean the touch screen:
1 Disable the touch screen by turning off the PC and disconnecting the power cord from the wall.
2 Spray a small amount of a mild glass cleaner onto a lint-free soft cloth.
3 Wipe the surface and each side of the display to remove any dirt, fingerprints, or other debris that
could hinder the touch recognition of the screen.
.
Using the stylus
You can use the stylus as a pointer device, like
your finger or a mouse click to more precisely
control the touch screen navigation. You can
also use it as a writing device when creating
notes in the HP SmartCalendar.
CAUTION: Do not spray or place the cleaner directly on the screen; spray the cleaner into the
cloth and then wipe the sides and surface of the touch screen. Also, avoid wiping in the top
corners where the optics are located.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of the screen as
this could cause damage to the touch screen.
Stylus holder