Required data and record limits, Creating an import file using microsoft outlook – HP Color LaserJet CM3530 Multifunction Printer series User Manual
Page 96
Required data and record limits
The required data for each type of record is as follows:
Record type
Required data
Maximum field length
Maximum records
E-mail address
name (or "first name" and "last
name")
address
245 characters
255 characters
User record
name
pin
address
245 characters
4-8 digits
255 characters
2,000
E-mail distribution list
name
address
dlname
245 characters
255 characters
245 characters
Fax number
name
245 characters
50 characters
2,000
Fax speed-dial
speeddial
code
50 characters
31 characters
2 digits
100 speed-dials, each with a
maximum of 100 entries
1
The “address” field can also be called “E-mail” or “E-mail Address”. The “faxnumber” field can also be called “Business Fax”
or “Home Fax”.
2
The maximum length might be less, depending on the language being used.
3
The total combined number of e-mail addresses and distribution lists must be 2,000 entries or less.
4
The "speeddial" field contains the name of the speed-dial, for example "Johnson Janitorial", and the "code" field contains the
speed dial code (a number between 0 and 99), for example 08. Either one- or two-digit numbers are accepted; for example,
either 06 or 6 can be used.
Creating an import file using Microsoft Outlook
If you have contacts saved in Microsoft Outlook, you can export them into a .CSV file and then use that
file to import them into the device. Follow these instructions to create a .CSV file using Microsoft Outlook.
1.
From the Outlook File menu, choose Import and Export....
2.
In the Import and Export Wizard, choose Export to a file and click Next.
3.
Select Comma Separated Values (DOS) and click Next.
4.
Select the Contacts folder and click Next.
5.
Type in a name for the file, with a .CSV extension. Click Browse to choose a location on your
computer to save the file. Click Next.
6.
Click Finish to finish the wizard and export the file.
7.
To import the .CSV file into the device, follow Steps 4 and 5 of the
instructions.
84
Chapter 4 Setting the digital sending options
ENWW