HP Color LaserJet CM3530 Multifunction Printer series - Manual (Page 105)

Using the HP DSS software
The HP Color LaserJet CM3530 MFP includes the Digital Sending Software (HP DSS) which can be
used to carry out its digital-sending tasks. If the HP DSS has been installed, all HP EWS Digital
Sending screens are available for read-only access. However, if you try to apply changes in any of the
HP EWS Digital Sending screens, the following message appears:
The device is being serviced by the Digital Sending Software at . Please use
Windows Configuration Utility to configure the device.
In this case, the digital sending options must be configured by using the HP MFP DSS Configuration
Utility. This centralizes the configuration tasks and helps control security.
If you still want to configure the embedded digital sending features from the Embedded Web Server,
you can remove your device by opening the HP MFP Digital Sending Software Configuration Utility. You
will need to select the MFP Configuration tab and remove your device from the configuration by selecting
it and then selecting Remove. Be sure to select Apply and OK after removing the MFP from the list.
Another alternative is to uninstall the software and then use the Embedded Web Server to configure the
embedded digital sending features.
ENWW Using the HP DSS software 93