Glossary – HP Cisco MDS 9124e Fabric Switch for BladeSystem c-Class User Manual
Page 57

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem
57
Glossary
This glossary defines terms used in this guide or related to this product. It is not a comprehensive
glossary of computer terms.
EE_Credit
AL_PA
Arbitrated loop physical address. A unique 8-bit value assigned during loop
initialization to a port in an arbitrated loop. See also
alias server
A fabric software facility that supports multicast group management.
API
Application programming interface. A defined protocol that allows applications to
interface with a set of services.
arbitrated loop
A shared 100 Mb/s Fibre Channel transport structured as a loop. Can support up to
126 devices and one fabric attachment. See also
AW_TOV
Arbitration wait time-out value. The minimum time an arbitrating L_Port waits for a
response before beginning loop initialization.
backup FCS switch Backup fabric configuration server switch. The switch or switches assigned as backup in
case the primary FCS switch fails.
bandwidth
The total transmission capacity of a cable, link, or system. Usually measured in bits per
second (b/s). May also refer to the range of transmission frequencies available to a
link or system.
broadcast
The transmission of data from a single source to all devices in the fabric, regardless of
zoning.
buffer-to-buffer
flow control
Management of the frame transmission rate in either a point-to-point topology or an
arbitrated loop. See also
,
.
CLI
Command line interface. Interface that depends entirely on the use of commands, such
as through telnet or SNMP, and does not involve a GUI.
compact flash
Flash (temporary) memory that is used in a manner similar to hard disk storage. It is
connected to a bridging component that connects to the PCI bus of the processor. Not
visible within the processor’s memory space.
configuration
The way a system is set up. May refer to hardware or software:
•
Hardware: The number, type, and arrangement of components that make up a
system or network.
•
Software: The set of parameters that guide switch operation. May include general
system parameters, IP address information, domain ID, and other information.
Modifiable by any login with administrative privileges. May also refer to a set of
zones.
CRC
Cyclic redundancy check. A check for transmission errors that is included in every data
frame.
data word
A type of transmission word that occurs within frames. The frame header, data field,
and CRC all consist of data words.
- Cisco MDS 9020 Fabric Switch SN6000C Fibre Channel Switch Cisco MDS 9120 Fabric Switch Cisco MDS 9216 Fabric Switch Cisco MDS 9140 Fabric Switch Cisco MDS 9500 Director Switch Cisco MDS 8Gb Fabric Switch for HP BladeSystem c-Class SN8000C Director Switch Cisco MDS 9216i Fabric Switch StoreFabric SN8500C Director Switch Cisco MDS 9134 Fabric Switch C-series Switch Expansion Upgrades Cisco MDS 9222i Multiservice Modular Fabric Switch Cisco MDS 9124 Fabric Switch Cisco Nexus 5000 Converged Network Switches Cisco MDS 9216A Fabric Switch